FallTech Contractor 1 D-Ring Climbing Harness with Pass-Thru Leg Buckles

FallTech Contractor 1 D-Ring Climbing Harness with Pass-Thru Leg Buckles

The FallTech 7015 Series Contractor harness is a great economical and compliant 1 D-ring harness. This harness has 5 point adjustability, mating buckle leg straps, lanyard keepers, mating buckle torso adjusters, and heavy-duty polyester webbing; which exceeds OSHA and ANSI requirements for tensile strength by more than 1,300 pounds! 

• Single back D-ring
• 5-point adjustability 
• EasyFit mating buckle leg straps 
• Lanyard keeper 
• Heavy-duty polyester webbing
• Woman friendly

Specifications & Standards:

• Webbing: Polyester; Min. 5,000 lbs.tensile strength
• D-Rings: Alloy Steel; Min. 5,000 lbs.tensile strength
• Buckles/Adjusters: Alloy Steel; Min. 3,375 lbs.tensile strength
• Tensile Strength: Min. 5,000 lbs.
• Max. Capacity: 425 lbs.
• OSHA: CFR1926.502, CFR1910.66
• ANSI: A10.32-2004, Z359.1-2007, Z359.12-2009

This harness has been tested by the women at GME Supply, and it is overall a favorite for an affordable, 1 D-ring harness that allows for ultimate adjustability and plenty of webbing to allow for all body shapes. The universal size tends to work for most body types; however, if you have a plus-size lower body, going up a size will be beneficial in the excess amount of webbing at the pass-through buckle sites. If you are petite, going to the smaller size might be beneficial as you won't have as much extra webbing dangling around. Please use the below size chart to help make your decision.